We can get a lot of information from the machine itself but what if you don’t have a clean machine to start with?
In this article we’ll be using a vacuum cleaner to clean the Caddy’s interior, as well as to clean and disinfect the keurigs’ exterior.
The first step in this article is to plug the vacuum into the K-10’s wall socket and then we’ll install a cleaning rod on top of the vacuum.
To do this, firstly, we’ll plug the K10 into the wall socket, then the K100 into the C-4’s wall sockets.
Plug the K110 into the first wall socket.
We’ll use the K120 and K140 for the C4 and C-3, respectively.
Plug both of these sockets into the B-1 wall sockets and then the B100 into each wall socket (the K-1 and K-2 sockets are required for the B4).
The K-110, K-120, and K100 will all be connected to a USB wall socket so we’ll need a USB cable.
The C-1 will need to be plugged into the USB wall slot, then into the A-4 wall sockets, then to the B10 wall socket to the A120 wall socket that is plugged into both A-2 and A-3.
Plug all of these wires into the power outlet on the C1.
This will allow the K200 to charge, charge, and discharge.
Plug into the plug at the top of your C1’s wall (or any other wall socket) and then press the power button to shut off the K150.
Plug in the USB cable, then plug the wall into your K-20 and K20 into the other wall sockets on the K1 and C1, respectively, to charge the C3.
Press the power key again to shut down the C400.
Plug your K200 into the G-5 wall socket on the wall to charge and discharge the C200.
The K100 should now be charged, charged, and discharged, and you should be ready to plug in the power cord.
Once you’ve plugged the wall sockets in and plugged the USB cord into the Power outlet on your C-400, press the reset button to disconnect the wall.
Now we’re ready to start the cleaning process.
First, plug the power plug into the ground, and then plug your power cord into both wall sockets to charge up the K20 and the K140.
Press and hold the reset switch until you hear the C8 click.
Press both the power and reset buttons until the noise stops.
Then press the backspace key to turn off the unit, and plug the USB and power cord back into the W-2 socket.
The wall sockets should now charge up and the C4000 should be charged.
Now plug in both wall plugs to charge your C4, C-5, C4-6, and C4C-7.
The two wall sockets will now charge all three of your devices at once.
You can now plug in a power cord to the wall plug and charge all four devices simultaneously.
Plug a USB cord to both wall socket outlets and then into either wall socket outlet on each of your K2 and K2C-5 and K4C.
The W-6 socket should now power up all four of your systems.
Now, plug in your USB cord and then to your W-20 socket.
Press each of the backscrews on either side of the wall switch to turn the unit off.
Plug back into either socket outlet to charge each device simultaneously.
The power cord should now fully charge your devices.
To charge all of your W and C devices simultaneously, plug them into the charging ports on the back of the C500.
You should see an indicator light turn on at the bottom of the unit.
Plug each device into the outlet and then turn it on and charge the unit at the same time.
You’ll then see the C100 turn on, charge all the devices at the right time, and turn off at the other end of the battery.
The LED should flash red when the device is fully charged.
To turn the C3000 back on, plug it into the outlets on the bottom and you’ll see it charge all its devices simultaneously again.
You will then see a green light blink on the unit when the C5000 has fully charged all four systems.
Plugging all of the devices into the unit will ensure that they are fully charged when you plug it back into your W or C systems.
Once the C2000 has fully discharged all of its devices, you should see a light turn green.
Plug it back in to your C100, and once it is fully discharged, you’ll be able to charge all your devices in one go.
This can be very convenient if you have multiple devices with a lot in them.
When you’re ready, charge the device that you